LED driver and dimmer compatibility means every part in the dimming chain is confirmed to work together before you buy: the strip, the driver, the dimmer or controller, the control...
Read More
Plug-in, direct-wire, and J-box describe how an LED power supply connects to your electrical system, not how it performs. A plug-in supply has a cord and plug for a standard...
Read More
A dimmable LED driver is built to accept a dimming signal and lower the strip's brightness, while a non-dimmable driver simply supplies steady full power with no way to dim...
Read More
Choosing between a 12V and a 24V LED driver is not really a free choice: the driver voltage has to match the voltage of the strip it powers. A 12V...
Read More
LED driver headroom is the spare capacity between the load a driver powers and its rated maximum, and it is why a driver should be sized with extra wattage rather...
Read More
To size an LED power supply, find the strip's watts per foot, multiply by the installed length to get the total load, add headroom so the driver is not run...
Read More
An LED strip kit bundles the main parts of a lighting system together, typically the strip, a matched driver, and the connectors needed to install it, sometimes with a controller....
Read More
LED strip width is the physical width of the strip, and it quietly shapes three practical things: which aluminum channel the strip fits into, which connectors will clamp onto it,...
Read More
The maximum LED strip run length is the longest single run you can power from one feed before voltage drop makes the far end noticeably dimmer or the strip exceeds...
Read More
Dotless LED strip lighting is a continuous line of light with no visible individual points. You get it by combining the right elements: a strip built for a smooth output,...
Read More
To choose LED strip brightness, start with the job the light has to do, then match it to the strip's rated output in lumens per foot. Accent lighting needs the...
Read More
