Building a Lit Floating Shelf Set
Building a lit floating shelf set means fitting a concealed run to each plank, returning every cable to one driver, and finishing with shelves that hover and glow with no...
Read More
Building a lit floating shelf set means fitting a concealed run to each plank, returning every cable to one driver, and finishing with shelves that hover and glow with no...
Read More
Installing a hallway cove run means fitting concealed strip along a corridor ledge or trough, feeding it in parallel from one correctly sized driver, and checking the line before the...
Read More
Lighting a display cabinet means putting a concealed run at every level that needs one, returning them all to one driver, and finishing with objects that read through the glass...
Read More
A home office desk and shelf lighting build is two installations on one power supply: a run lighting the work surface, and runs under the shelves above. Keep them apart...
Read More
Building a backlit TV and media wall means putting concealed strip behind the screen and behind the joinery so the wall carries a soft glow and no emitter shows from...
Read More
A covered patio lighting build puts low voltage strip under a roof that shelters part of the run and almost none of the rest, so the job is matching each...
Read More
This LED strip lighting FAQ answers the questions people ask most before their first order, in the order they usually come up. Short version: a low voltage strip needs a...
Read More
Room-by-room LED lighting planning works because each space asks a different question. A kitchen needs light on a work surface without glare in the eye. A bathroom needs an IP...
Read More
To future-proof an LED lighting install, build it so that any single part can be swapped without disturbing the rest. That means driver capacity above the connected load, a control...
Read More
An LED strip lighting warranty is a manufacturer's commitment to remedy a product that fails through a defect in materials or workmanship, under the conditions the product was rated for....
Read More
To brief an electrician for an LED strip project you need five facts in one place: the strip voltage and the total connected load, the driver you selected and the...
Read More
The difference between new build vs retrofit LED lighting is who decides the geometry. At drawing stage you set the cove depth, the chase route, the driver cupboard and the...
Read More